How does it work?
Easy! Just screw the MonsterPod™ into your camera and mount it to
a table, chair, wall, window, ceiling, rail, fire-hydrant, light-post,
parking meter, hand rail, rock or even a tree (pine tree or palm tree,
it makes no difference). Set your timer and shoot! Fast! Simple! Easy!
Convenient! Instantly storable in your pocket or purse!
What angle will it grip?
MonsterPod holds your camera absolutely motionless horizontally, vertically
or upside down! At any angle, on nearly any surface!!
What happens if it gets dirty?
MonsterPod™ is a polymer. It does not dry or harden over time. It
has the ability to absorb dirt, sand, bark and grime. You simply wipe,
brush, wash off any dirt that the polymer base may come in contact with.
If you can not wash it off, simply massage the dirt into the polymer and
the dirt will not affect the stickiness.
How long does it stick?
MonsterPod™ only forms a "temporary" bond with other surfaces.
Normally it will provide one minute to one hour of stabilisation, depending
on the type of surface and degree of angle.
How do I take it off?
MonsterPod™ is simple to dislodge from where it is mounted. With
a gentle tug to the base, it will peel right off. If not, you may at times
need to reach your fingers under the base and pull it off.
What objects can I stick it on?
MonsterPod™ can be used to support your digital camera by molding
its Viscoelastic Morphing Polymer base to, but not limited to, the following:
metal, wood, plastic, veneer, marble, Formica, cement, block, steel, brick,
glass, tile, enamel, sheet rock, and even rocks and trees.
Will it stick to my skin?
MonsterPod™ will not adhere to the skin nor is it harmful to the
skin.
Can I hold it in my hands?
MonsterPod™ can be kept attached to your camera and molded to conform
to any shape. You can even mold it into a handle to better hold your compact
camera to provide additional support when taking pictures.
Is it messy?
MonsterPod™ is not a gel. It is an elastic solid...viscoelastic
polymer. This viscoelastic polymer is contained within a neoprene membrane
and will not harm or affect your camera.
What is it made out of?
MonsterPod™ is completely non-toxic. It is free from solvents and
harmful chemicals. Children can play with it. Animals will not be harmed
by it. It is made from three main elements: 1) a viscoelastic morphing
polymer base, 2) a neoprene outer membrane, 3) an internal semi-ridged
metal and plastic base.
Can it fall off?
MonsterPod™ was developed to provide a temporary mounting device
for compact digital cameras. It is designed to hold a 10 oz or less camera
for a period of time long enough to set the automated timer and take a
picture. It will begin to ooze (stretch) from its location after several
minutes.
Does heat or cold affect it?
MonsterPod™ is not affected by cold or heat. You can use it on cold
winter days or on hot summer days.
What cameras will it support?
MonsterPod™ will support nearly all compact digital cameras. Nearly
90% of all compact digital cameras manufactured today weigh less than
10 oz. (300 grams) and can be supported.
How do I attach it to my camera?
MonsterPod™ is mounted to your camera using the same threaded hole
in the bottom of your camera as other tripods. To be exact the hole size
is 1/4 inch with a #20 thread.
When and where can I get MonsterPod™?
MonsterPod™ is available to buy – right here, right now!
